STEL Equipment

Synthesis of highly effective electrochemically activated clean and pure functional solutions

Introduction

STEL equipment are used for the synthesis of highly effective electrochemically activated ecologically clean and pure functional solutions:

  • Anolytes: which is used for disinfecting, sterilizing and sanitizing
  • Catholytes: which is used for cleaning

STEL equipment are used at site production of electrochemically activated detergent, antimicrobial, remedy and technological solutions – anolyte and catholyte with high functional activity and ecological purity. Each STEL device contains flow-through electrochemical diaphragm reactor, hydraulic system for initial solution supply into the reactor and electrochemical synthesis products outlet from the reactor and a power supply.

Output Solutions

The electrochemically activated solutions - anolyte and catholyte - metastable solutions prepared by electrochemical treatment of the supplied brine solution in diaphragm electrochemical reactor, physicochemical parameters and the cathalytic ability of the brine solution in redox reactions, varies with time.

Electrochemically activated solutions are divided into two main types: the anolyte and catholyte.

Anolyte Solution

The electrochemically activated anolyte has an oxidizing activity of physical and chemical interactions, spontaneously decreasing over time. Anolyte electrochemically activated depending on the pH and the catalytic activity determined preparation technology is divided into:

  • "Anolyte A" having a pH of less than 5 (acidic anolyte)
  • "Anolyte Neutral AN " pH of 5.5 to 6.5
  • "Anolyte Neutral ANK" with a pH of 6.5 to 7.5

Catholyte Solution

The electrochemically activated catholyte has a reducing activity of physical and chemical interactions, spontaneously decreasing over time. Electrochemically activated Catholyte depending on the pH and the cathalytic activity is divided into:

  • "Catholyte K" having a pH above 9.0 (alkaline catholyte)
  • "Catholyte Neutral CN" having a pH of from 5.5 to 9.0

Types of STEL Equipment
Eklor Systems AS offers STEL equipment with different output capacities ranging from STEL 20 to STEL 250 (20 l/hr to 250 l/hr) with different mode of functions (manual, semi automatic and automatic), for production of different liquid disinfection and sterilization solutions- Neutral Anolyte (ANK), Neutral Anolyte (AN), Anolyte (A); Detergent solutions- Catholye K and Catholyte KN with different mode of functions (manual, semi automatic and automatic).

STEL device for electrochemical production of concentrated disinfectant “Anolyte ANK ” with oxidant contents of 1200 mg/l and overall salinity less than 1g/l, active chlorine content of 0.12 ± 10%, with pH value of 7-8 and production of Catholyte. The shelf life of the finished solution is 30 days.

STEL-NG

Fully automated installation is in anticorrosive plastic housing, wall mount (provided desktop publishing), with integrated electronic current stabilizer to control output parameters, built-in pump of high accuracy for dosing brine supply. Provides automatic washing without connecting additional devices, water pressure control in the electrochemical block, maintaining the necessary level of the anolyte in the tank drive.

Device generates any anolyte solutions both concentrations and in total mineralization.

  • Capacity: 80-180 l/h
  • Power consumption: 600 W

Enquire about this device >

STEL equipment for electrochemical production of concentrated disinfectant “Anolyte AN ” solution with oxidant contents of 500 mg/l and overall salinity less than 5g/l, active chlorine content of 0.01-0.05 g/l with pH value of 7-8 and production of Catholyte. The shelf life of the finished solution is 30 days.

STEL-20

Installation is made in anticorrosive plastic housing, wall mount with integrated electronic current stabilizer to control output parameters, built-in water pump for dispensing brine supply.

  • Capacity: 40 l / h
  • Power consumption: 300 W
  • Dimensions: 290 mm x 230 mm x 85 mm
  • Weight: 1.9 kg

Enquire about this device >

STEL-40

Installation is made in anticorrosive plastic housing, wall mount with integrated electronic current stabilizer to control output parameters, built-in water pump for dispensing brine supply.

Additionally it can be equipped with an electronic scoreboard displays information about the operating modes as well as a water pressure regulator on the electrochemical unit.

  • Capacity: 40 l / h
  • Power consumption: 400 W
  • Dimensions: 290 mm x 230 mm x 85 mm
  • Weight: 2.2 kg

Enquire about this device >

STEL-60

Fully automated installation is in anticorrosive plastic housing, wall mount (provided desktop publishing), with integrated electronic current stabilizer to control output parameters, built-in pump of high accuracy for dosing brine supply. Provides automatic washing without connecting additional devices, water pressure control in the electrochemical block, maintaining the necessary level of the anolyte in the tank drive.

  • Capacity: 60 l / h
  • Power consumption: 600 W
  • Dimensions: 320 mm x 280 mm x 370 mm
  • Weight: 6.7 kg

Enquire about this device >

STEL-80

Installation is made in anticorrosive plastic housing, wall mount with integrated electronic current stabilizer to control output parameters, built-in water pump for dispensing brine supply.

  • Capacity: 80 l / h
  • Power consumption: 800 W
  • Dimensions: 290 mm x 230 mm x 85 mm
  • Weight: 5.3 kg

Enquire about this device >

STEL-120

Installation is made in anticorrosive plastic housing, wall mount with integrated electronic current stabilizer to control output parameters, built-in water pump for dispensing brine supply.

Additionally it can be equipped with an electronic scoreboard displays information about the operating modes as well as a water pressure regulator on the electrochemical unit.

  • Capacity: 120 l / h
  • Power consumption: 1200 W
  • Dimensions: 290 mm x 230 mm x 85 mm
  • Weight: 6.2 kg

Enquire about this device >

STEL-250

Fully automated installation is in the frame body, desktop layout, with integrated electronic current stabilizer with con-trolled output parameters, built-in pump of high accuracy for dosing brine supply. Provides automatic washing without connecting additional devices, water pressure control on the electron-of for- unit, maintaining the necessary level of the anolyte in the tank drive.

  • Capacity: 250 l / h
  • Power consumption: 800 W
  • Dimensions: 600 mm x 430 mm x 580 mm
  • Weight: 26.7 kg

Enquire about this device >

Benefits

Electrochemically activated oxidants mixture, produced by STEL devices are unique and have no comparison with traditional disinfection solutions.

Benefits of electrochemically activated disinfectant solution (Anolye A, Anolyte AN and Anolyte ANK) produced by STEL equipment are unparalleled with comparing of any other installations which are used in different field of disinfection. STEL equipment have following advantages over traditional disinfection systems:

  • Anolyte ANK has high antimicrobial activity against all pathogenic microorganisms, including spores.
  • Anolyte ANK has a disinfecting and sterilizing properties.
  • Anolyte ANK has washing ability, which allows to combine the stage presterilizing cleaning and sterilization.
  • Anolyte ANK is a multi-purpose solution, and is used for disinfection, cleaning and sterilization of medical products, and for general cleaning of premises, disinfection equipment in hospitals, clothing, hand surgery, etc.
  • Anolyte ANK eliminates the possibility of generating resistance to the pathogens it for any long and uninterrupted period, which is caused by metastability anolyte actives substances.
  • Anolyte ANK has minimal toxicity class (IV) and enteral inhalation exposure, skin-resorptive and irritating absent. Approved for use in maternity wards and children's institutions.
  • Anolyte ANK can be applied by wiping, irrigation, spraying and soaking.
  • The low concentration of active substances in the
  • Anolyte ANK, together with its speedy action provides no aggressive effect on various materials.
  • Anolyte ANK is an environmentally friendly means, as it does not leave any traces after treatment facilities, and the active substance is completely anolyte spontaneously degraded to drinking brackish water.
  • Anolyte ANK can be used for treating patients in the presence of the objects.
  • Anolyte ANK is a ready solution, which is easy to obtain with the help of STEL equipment in the field of application in the required quantities.
  • Small in comparison with other disinfectants cost of Anolyte ANK - an indicator of profitability and rapid return.
  • Anolyte ANK can replace more than 99% of all disinfectants used in health care facilities, while ensuring a high level of disinfection.

Industries We Serve

Food Service
Hospitals
Municipal Services
Health care
Cleaning
Developing communities
Transportation
Agriculture
Fishing & poultry